What is the best way to fill cracks in asphalt?

Table of Contents

Are you in the paving industry and tired of spending long hours filling cracks in asphalt by hand? Or, are you a homeowner looking to repair your own driveway without breaking your back? If either of these situations applies to you, then get ready to be introduced to a game-changing machine that will revolutionize the way you handle asphalt repairs. The asphalt filling machine is a must-have tool for anyone working with or maintaining any type of paved surfaces.

A pavement caulking machine is a new type of asphalt pavement caulking equipment. The equipment uses a thermal oil circulation to indirectly heat and melt the asphalt to ensure that the asphalt does not scorch, discolor, and paste the barrel. Hose caulking, manual forward and reverse stirring, uniform mixing, high melting efficiency, electronic ignition mode, automatic heating temperature control, automatic sensor temperature detection, automatic small fire insulation, high-temperature heating molten material, energy saving and time-saving, Ensuring long-term work.

ModelGF-120
Dimension2150*1250*1460mm
Tank volume120L
PowerHonda
Heating sourceDiesel burner
Mixing methodMixing motor
Grouting speed0-25m/min
Tube length5m
Control SystemFull electronic thermostat control
Melting time45Min

Nine Notes for the Operation of the Asphalt Crack Filling Machine:

1. The operator of the asphalt crack sealing machine must be trained.
2. Workers should wear reflective overalls when working on the road.
3. Before starting working, workers should check the oil circuit and pipeline connection to ensure no leakage when the crack
sealing machine is working.
4. Be careful of the high-temperature part of the asphalt crack sealing equipment to avoid burns.
5. When adding the cracking sealing material, pay attention to avoiding the asphalt splash.
6. There should be no water and air when adding heat conduction oil.
7. When operating the road crack sealing machine, please keep an eye on the condition of the furnace and temperature thermometer.
8. If an emergency happens, please turn off the power supply engine in time.
9. Don’t put stones and other debris into the oil tank of the hot asphalt crack filler machine.

1 thought on “What is the best way to fill cracks in asphalt?”

  1. Avatar

    If some one desires to be upⅾаted with hottest technologies after thɑt
    he must be go to see this web site and be up
    to date everyday.

Leave a Comment

Your email address will not be published. Required fields are marked *

CAN NOT GET ENOUGH

Leave a message to us get your favorite information