What is a multifunctional punching and shearing machine?

Table of Contents

The multi-function punching and shearing machine is a multi-purpose punching and shearing machine that can cut, punch, and cut angle steel, channel steel, steel plate, and round steel. The current research and development model has five stations, and can easily Replace the mold is easy to operate and can be operated with simple training. It is suitable for bridge construction, construction sites, power engineering, and other fields. With the development trend of industrialized production, the level of high-tech is continuously improved, and the quality and characteristics of punching and shearing machines are also gradually improving and improving.

Application range of punching and shearing machine:

Steel structure processing

Elevator car and parts processing

Trailer—spare tire parts, trailer hinges, hooks, inserts, tile panels

Construction machinery industry—belt conveyor, processing on mixing station

Agricultural and animal husbandry machinery industry—threshing frame body, trailer body parts processing

Food industry machinery – slaughtering equipment frame and parts processing

High and low voltage iron tower parts processing

Wind power equipment — parts processing on stairs and treads on wind power towers

Machining – processing of building embedded parts/conveyor brackets and other components for connection

Grain machinery—grain and oil equipment starch equipment bracket, shell, small parts processing

Railway wagon/automobile, crane parts processing

Channel steel, square steel, round steel, H steel, I-beam, and other steel cutting, punching, bending

Operation guide:

1. Before starting the machine, check whether the driving parts of the punching and shearing machine and the connecting screws and pins of each part are loose. Whether the electrical grounding is in good condition.

2. Lubricate all parts before work, and drive for two to three minutes, and then start work without any problem. 3. Overloading is not allowed, and punching and shearing of quenched steel is strictly prohibited.

4 When working, you should wear gloves and labor protection articles, and sandals and slippers are strictly prohibited.

5. When punching and shearing, always refuel the punch to prevent the upper and lower punches from skewing.

6. Pay attention to the safety of your fingers when feeding, especially when the sheet is rushed to the end and the presser foot cannot press the sheet, it is forbidden to punch and cut.

7. When driving, it is strictly forbidden to disassemble, proofread the cutting edge and die. Do not hit dies, blades, and other parts with force

Display of five workstations:

Leave a Comment

Your email address will not be published. Required fields are marked *


Leave a message to us get your favorite information