Share on facebook
Share on twitter
Share on linkedin

How to solve the problem of debugging the forward and backward wires of the rebar thread rolling machine.

Table of Contents

Novices are always troubled by the problem of forwarding and backward wire when using the steel bar thread rolling machine. The following article will answer the question of how to forward thread and backward thread and make it easier for you to use the steel wire rolling machine.

The rolling wheels of the steel bar rolling machine are divided into two types: Marking and non-marking wheels. Before purchasing the rolling wheel, you need to measure the thickness of the gasket of the steel bar rolling machine. The thickness of the gasket is 6mm. Purchase a marking rolling wheel; the gasket thickness is 5, 6, and 7, and the non-marking rolling wheel.

Forward thread

Upper workpiece➡Press the forward start button QZ➡Manual feed rib ➡When the rib cutter opens, continue to manually feed for a while➡Automatically roll the thread➡Touch the feed stroke switch K2 to stop➡Automatically reverse and retract the tool after a delay ➡Turn the feed handle, return the rolling head to the initial position, and stop after touching the retraction travel switch K3, and work like this repeatedly

Backward thread

Load the workpiece ➡ press the forward start button QF ➡ manual feed for a moment ➡ press the stop button TA when the rib cutter is opened ➡ press the reverse start button QF ➡ manual feed for a moment ➡ automatically roll the reverse wire thread ➡ touch in Knife travel switch K2 stop ➡ press forward start button QZ ➡ forward retreat ➡ After the thread rolling wheel exits the workpiece, move the feed handle to return the rolling head to the initial position, and repeat the operation.

After the rebar thread rolling machine cuts a certain amount of steel bars, the thread rolling machine blades need to be replaced.

IDEAL MACHINERY

The IDEAL rebar thread rolling machine, this rolling machine gives you great flexibility and control, which is very convenient for thread steel bar. we specialize in thread rolling machines. We are premier thread rolling machine manufacturers who can provide the thread rolling machine you need for fast, efficient pumping right now.

A few of the many models we offer include the following:

<1>HGS40 Rebar thread rolling: This is our basic model

The rolling range of this type of thread rolling machine is 16-32mm; the longest processing length is 80mm.

<2>HGS50 Rebar thread rolling: This is our upgrade model

The rolling range of this type of thread rolling machine is 16-40mm; the longest processing length is 80mm.

<3>HGS50PRO This is our hot products

The rolling range of this type of thread rolling machine is 16-40mm; the longest processing length is 150mm(Customized processing length 300mm).

Leave a Comment

Your email address will not be published. Required fields are marked *